Kiesrechner
Berechnen Sie das Gewicht in Tonnen und das Volumen von Kies oder Schotter für Gartenwege und Unterbau.
Projektmaße
Geben Sie Ihre Maße ein, um den genauen Materialbedarf zu berechnen
Geben Sie oben Maße ein, um Ergebnisse zu sehen.
Schritt-für-Schritt Beispielrechnung
Beispiel: Installing a 10 ft × 20 ft crushed stone patio base with 3 inches depth and 10% compaction allowance.
Area: 20 ft × 10 ft = 200 sq ft.
Depth in Feet: 3 in ÷ 12 = 0.25 ft.
Volume: 200 × 0.25 = 50 cu ft + 10% compaction = 55 cu ft.
Cubic Yards: 55 ÷ 27 = 2.04 cubic yards.
Convert to Tons: 2.04 cu yds × 1.4 tons/yd³ = 2.85 tons.
Gravel Weight & Volume Formula
Total Tons = (Length [ft] × Width [ft] × Depth [in ÷ 12]) ÷ 27 × (1 + Buffer) × Density [tons/yd³] Area is multiplied by layer depth in feet to get volume in cubic feet. Dividing by 27 gives cubic yards. Multiplying cubic yards by the stone density factor (~1.4 tons per yard) produces the total tonnage to purchase.
Formelvariablen
Berechnungsgrundlagen
- Crushed stone base compacts by roughly 10% to 15% when tamped or rolled.
- Gravel suppliers typically sell bulk material by the ton or by the cubic yard.
Häufig Gestellte Fragen
Typische Fragen von Heimwerkern und RenovierernKiesrechner
How deep should driveway gravel be?
A new gravel driveway needs a total depth of 8 to 12 inches composed in layers: a 4–6 inch sub-base of coarse crushed stone (#3 or #4), followed by a 4-inch layer of #57 stone, topped with 2 inches of dense crusher run.
How many square feet does a ton of gravel cover?
One ton of gravel covers approximately 100 square feet at 2 inches deep, or about 50 square feet at 4 inches deep.
Verwandte Rechner inGarten & Landschaftsbau
Passende Rechner für Ihr Bauvorhaben
Betonrechner
Berechnen Sie Betonvolumen in Kubikmetern und Fertigsäcke für Fundamente und Platten.
Rindenmulchrechner
Berechnen Sie Rindenmulch in Litern, Kubikmetern und Säcken für Beete.
Zaunrechner
Berechnen Sie Zaunpfosten, Querriegel, Zaunlatten und Fertigbeton für Holzzäune.